FIXON® Industrial Marker

Benefits for using FIXON® Industrial Marker:

Clean, legible and durable marking on many materials (metal, plastic, glass, wood, rubber, concrete etc.)
Colors: white, yellow, orange, red, green, blue, blacklightfast
weather-, acid- and base-proof

Type:
FIXON® Industrial Marker in tubes (100ml)
FIXON® Industrial Marker in bottles (1000 ml)
FIXON® Industrial Marker in fillable fabric-writing-bottle.
FIXON® Industrial Marker – valve pen
FIXON® Industrial Marker N series – valve pen
FIXON® Industrial Marker K series – valve pen

FIXON® Industrial Marker in tubes
is an industrial marker in tubes used for medium and wide labeling
(from 1.8 mm to 6.5 mm).
Colours: white, yellow, orange, red, green, blue, black
As writing implement the writing points are used (as for tubes and fabric-writing-bottles)
The writing heads could be very easy dismantled. We recommend the cleaning of our writing heads with our cleaning agent. Through the cleaning our writing heads are useable again and bring you cost saving.

FIXON® Industrial Marker in bottle (1000 ml)
The fabric-writing bottle consists of the following components:
*Fillable fabric-writing-bottle
*Reducing piece
*Writing point

All parts are separately available.
The advantage of using the fillable fabric-writing-bottle is the permanently even flow of writing that is achieved.
Fillable fabric-writing-bottles are delivered empty.

FIXON® Industrie Marker N Series und K Series – valve pen
Industrial marker with a valve system for a lasting and durable marking of almost all surfaces:
metal, rubber, plastic, glass, concrete, stone, wood and also for slightly oiled surfaces.

Thanks to the unique valve system we reach an optimal writing.

Properties:
multi-purpose markers for almost every materialunique
valve systemlight-resistant
weather-, acid- and base-proof
Colours: white, yellow, red, black

According to requirements we offer two line widths:
*valve marker with round acrylic writing point of about 3 mm
*K Series – with ball-point of about 1 mm width and 11 ml volume
*N- Series - with ball-point of about 3 mm width and 11 ml volume Two replacement points provided in every pen.

Application note for: FIXON® Industrie Marker K Series

Shake pen well.
Take off cap, before the first application hold pen upside down and briefly de-aerate by simultaneously pressing the tip (for example above a paper or cloth).
If Ink stops to flow well, press again.
Replace cap after use.

Test on concealed area before using.

Application note for: FIXON® Industrie Marker N series

Shake pen well. Take off cap, before the first application hold pen upside down and briefly de-aerate by pressing with thumb. Hold pen with tip pointing downwards and press slightly until tip is soaked with dye.
If Ink ceases to flow well, press again. Replace cap after use.

Spare tip in the pen's bottom.

Test on concealed area before using.

Application note for: FIXON® Industrie Marker

Pens shake well before use. In writing position, press down repeatedly on nib until ink appears.